Magnuson Coat Hangers

The SR34 from Magnuson is a vinyl clad hanger receptacle for use with ball top hangers on square tube hanger rods. These are best paired with the MG-17PX ball top coat hanger on a 3/4" rod. Access to an open end of the rod is required for installation...

Magnuson's Basic coat hanger is a unique open hood design made with Beech veneer with a chrome hook. The rounded corners and 11-/16 of an inch depth make sure that you don't get "hanger shoulders". If you have questions, please call us at...

Magnuson's GRIP coat hanger is a unique open hood design made with Beech that is coated with black rubber and a black galvanized steel hook. The rubber coating insures that jackets and dress straps stay put. And rounded corners and 11-/16 of an inch...

The MG-17R is a solid wood coat hanger with an open hook top and your choice of Painted Black, Walnut, Oak, Mahogany, or Cherry finish. The open hook is 1-1/2" but this hanger is also available with a 5/8" mini hook as the MG-17S. If you have...

The MG-17S is a solid wood coat hanger with a mini hook top and your choice of Painted Black, Walnut, Oak, Mahogany, or Cherry. The mini hook is 5/8" but this hanger is also available with a standard 1-1/2" open hook as the MG-17R. If you have...

The Magnuson Tubulus-H10 Coat Peg is crafted of Brushed Steel with the front of the peg in Polished Stainless finish, matched with a coat hanger, crafted of varnished beech and a brushed stainless steel hanger hook. This unit is also available with...

The R1.5 from Magnuson is a steel receptacle for use with a MG-17PP and MG-17B coat hangers on a 1-1/4" diameter hanger rod. Access to the end of the hanger rod is required for installation. Please note that MG-17PP and MG-17B ball top coat hangers are...

The MG-17B light hardwood coat hanger measures 5/8 of an inch wide so no one can complain of "hanger shoulders" on their jackets. It has an anti-theft ball top to be used with an R1.5 Receptacle. It includes a trouser bar. This product page is for a...

The MG-17H light hardwood coat hanger measures 5/8 of an inch wide so no one can complain of "hanger shoulders" on their jackets. It includes a trouser bar. This product page is for a single coat hanger. Packs of 24 and 100 are also available. Please...

Magnuson's MG17P coat hanger is a slotted anti-theft design, designed for use with wire grids.  It is molded polystyrene and is available in your choice of Black or Charcoal Grey. 8-7/8" H x 17" W x 3/4" D Material: Polystyrene

Magnuson's MG-17PM coat hanger is a slotted anti-theft design, designed for use with wire grids.  It is molded polystyrene and is available in your choice of Black or Charcoal Grey.  8-7/8" H x 17" W x 3/4" D Material: Polystyrene

The Magnuson MPIM is a heavy duty magnetic coat hanger which is available in White, Black or Silver.  The hanger has beech end caps. It holds up to 12 pounds. This combination of coat hanger/hook, and rather strong magnet is a part of the Pi...

The Filo-A from Magnuson is an epoxy coated wire coat hanger with an anti-theft closed loop.  It is also available with a standard open hook as the Filo-S. Finished in White, Black, Silver or Sand. This product has a minimum order quantity of 2...

The Filo-S from Magnuson is an epoxy coated wire coat hanger with a standard open hook.  It is also available with an anti-theft closed loop as the Filo-A. Finished in White, Black, Silver or Sand. This product has a minimum order quantity of 2...

Open hook polystyrene coat hanger. This item comes in a pack of 100, and is also available in packs of 6 and packs of 24. 9" H x 17" W x 3/4" D

Open hook polystyrene coat hanger. This item comes in a pack of 24, and is also available in packs of 6 and packs of 100. 9" H x 17" W x 3/4" D

Open hook polystyrene coat hanger. This item comes in a pack of 6, and is also available in packs of 24 and packs of 100. 9" H x 17" W x 3/4" D

Molded polystyrene coat hook with mini-hook. This item comes in a pack of 100, and is also available in a 6 pack and 24 pack. 7-7/8" H x 17" W x 3/4" D

Molded polystyrene coat hook with mini-hook. This item comes in a pack of 24, and is also available in a 6 pack and 100 pack 7-7/8" H x 17" W x 3/4" D

Molded polystyrene coat hook with mini-hook. This item comes in a pack of 6, and is also available in a 24 pack and 100 pack 7-7/8" H x 17" W x 3/4" D

Molded polystyrene coat hanger with T-top for use with the R1.5 Receptacle. Available in Black or Charcoal Grey. This item comes in a pack of 24 and is also available a 100 pack. 9-3/4" H x 17" W x 3/4" D

Molded polystyrene coat hanger with T-top for use with the SR34 Receptacle. Available in Black or Charcoal Grey. This item comes in a pack of 24, and is also available in a 100 pack. Please note the SR34 Receptacles are sold separately...

The Magnuson Pi coat hanger is steel with beech end caps. This is the PI-CI-A with an anti-theft closed loop.  Open hook Pi coat hangers are also available.  If you like the style but need something a bit different, you may like the Pi Coat...

The Magnuson Pi coat hanger is steel with beech end caps. This is the PI-CI-S with a standard open hook.  Anti-theft closed loop Pi coat hangers are also available. Both versions of the Pi coat hangers may be specified finished in White, Black,...

Pack of 50 Closed Loop Steel Wire coat hangers finished in Silver powder coat. 7-5/8" H x 17" W x 1/8" D

Pack of 50 Steel wire coat hangers finished in Silver powder coat. 7-5/8" H x 17" W x 1/8" D