Wall Coat Racks - No Shelf - Metal

The 2043-XL-AL Coat Hook Rack from Peter Pepper consists of 4 double prong coat hooks on an anodized aluminum bar.  This particular unit used to have the code 2143-XL-AL but Peter Pepper changed to maintain continuity in their numbering system...

The 2043-AL Coat Hook Rack from Peter Pepper consists of 3 double prong coat hooks on an anodized aluminum bar.  This particular unit used to have the code 2143-AL but was changed by Peter Pepper.  It's the exact same unit. If 3 hooks doesn't...

Magnuson's Yellow TreeHooked wall mounted coat rack is a playful and innovative design, able to be mounted at just about any angle.  These may be used individually or positioned in ways to create designs and patterns.  Stand-off from the wall...

Magnuson's Light Blue TreeHooked wall mounted coat rack is a playful, innovative design. Mount them at any angle, use singly, or position groups to create designs. Stand-off from the wall is 1-3/16 inches.  The material used is steel, powder coated...

Magnuson's Dark Blue TreeHooked wall mounted coat rack is a playful and innovative design, able to be mounted at just about any angle.  These may be used individually or positioned in ways to create designs and patterns. Stand-off from the wall is...

Magnuson's Black TreeHooked wall mounted coat rack is a playful and innovative design, able to be mounted at just about any angle.  These may be used individually or positioned in ways to create designs and patterns. Stand-off from the wall is...

Magnuson's White TreeHooked wall mounted coat rack is a playful, innovative design. Mount at any angle, use singly, or position groups to create designs. Stand-off from the wall is 1-3/16 inches.  The material used is steel, powder coated in your...

Magnuson's Gray TreeHooked wall mounted coat rack is a playful and innovative design, able to be mounted at just about any angle.  These may be used individually or positioned in ways to create designs and patterns. Stand-off from the wall is...

Magnuson's Green TreeHooked wall mounted coat rack is a playful and innovative design, able to be mounted at just about any angle.  These may be used individually or positioned in ways to create designs and patterns. Stand-off from the wall is...

Magnuson's Red TreeHooked wall mounted coat rack is a playful and innovative design, able to be mounted at just about any angle.  These may be used individually or positioned in ways to create designs and patterns. Stand-off from the wall is 1-3/16...

So, you sometimes have more coats to hang up than you have room to do so?  The 2090-AL Swiveling Coat Hook Rack from Peter Pepper may be the answer. This neat little wall mounted coat rack is only 8-3/4" wide, but contains 5 double prong coat hooks...

Peter Pepper's 2147-AL Sliding Coat Hook Rack has 6 double-prong coat hooks on an anodized aluminum bar.  The locations of the coat hooks are movable on the bar.  Each hook can either be fixed in place with the supplied set screws or left loose...

The Camden-Boone 172-002 coat hook rack has 12 rather sturdy coat hooks on a one-piece aluminum panel. These have been tested to 40 pounds per hook and are perfectly fine for hanging just about anything, including backpacks full of books.  A...

The 172-001 coat hook strip from Camden-Boone has 10 rather sturdy coat hooks formed from a 28" long aluminum panel. These have been tested to 40 pounds per hook and are perfectly fine for hanging just about anything, including backpacks full of books...

The 172-000 coat hook strip from Camden-Boone has 8 rather sturdy coat hooks formed from a 22" long aluminum panel.  These have been tested to 40 pounds per hook and are perfectly fine for hanging just about anything, including backpacks full of...

Camden-Boone's 170-103 Coat Hook Panel is designed to be absolutely functional in unforgiving environments. It was tested to 70 pounds per hook and never budged. It's pretty in the way a fireplug is: delivering consistent robust function without frills...

The 2165-AL Coat Rack from Peter Pepper uses a simple support system but adds six of Peter Pepper's anti-theft non-removable 2166 coat hangers.  The wall-mounted rack portion uses two end brackets to support an anodized aluminum hanger rod. ...

The 2145-AL Coat Rack from Peter Pepper is elegant in its simplicity, suitable for executive spaces.  This wall mounted rack uses two end brackets to support an anodized aluminum hanger rod.  The 32" length makes it perfect for attachment to...

Looking for a coat rack that adjusts to changing seasons and styles?  This Peter Pepper 2150-AL Sliding Coat Hook Rack has 5 double-prong coat hooks on an anodized aluminum bar.  The neat thing about it is that the coat hooks are movable. ...

The Peter Pepper 2149-AL Sliding Coat Hook Rack has 5 triple-prong coat hooks on an anodized aluminum bar.  What sets it apart from most coat racks is that the locations of the coat hooks are adjustable.  Each hook can be either fixed in place...

Peter Pepper's 2148-AL Sliding Coat Hook Rack has 6 single-prong coat hooks on an anodized aluminum bar.  It's a bit different from most coat racks because the locations of the coat hooks are adjustable.  Each hook can either be fixed in place...

The 2142XL-AL Coat Hook Rack from Peter Pepper consists of 5 single prong coat hooks on an anodized aluminum bar. If 5 hooks is more than you require, see the 2142-AL, the 3 hook version. Wall mounting is through front of panel. Dimensions: 14-1/4"...

The 2142-AL Coat Hook Rack from Peter Pepper consists of 3 single prong coat hooks on an anodized aluminum bar. 3 hooks not enough? See the 2142-XL-AL, the 5 hook version. Wall mounting is through the front of the panel. Dimensions: 8-1/4" W x...

The 2141-XL-AL Coat Hook Rack from Peter Pepper consists of 5 double prong coat hooks on an anodized aluminum bar. More hooks than you need? See the 2141-AL, the 3 hook version. Wall mounting is through the front of the panel. Dimensions: 14-1/4" W...

The 2141-AL Coat Hook Rack from Peter Pepper consists of 3 double prong coat hooks on an anodized aluminum bar. Not enough hooks for you? See the 2141-XL-AL, the 5 hook version. Wall mounting is through front of panel. Dimensions: 8-1/4" W x 4"H x...

The 2140-XL-AL Coat Hook Rack from Peter Pepper consists of 5 coat knobs on an anodized aluminum bar. Wall mounting is through the front of the panel. Dimensions: 14-3/4" W x 7/8"H x 1-1/2"D Weight: 3 Pounds Attachment: Through Front of Panel

The 2088-AL Coat Hook Rack from Peter Pepper consists of 3 triple prong coat hooks on an anodized aluminum bar. Wall mounting is concealed. Dimensions: 16" W x 4-1/2"H x 3-3/4"D Weight: 4 Pounds Attachment: Concealed

The 2086-AL Coat Hook Rack from Peter Pepper consists of 4 triple prong coat hooks on an anodized aluminum bar. Wall mounting is concealed. Dimensions: 22-3/8" W x 5"H x 4"D Weight: 4 Pounds Attachment: Concealed

The 2085-AL Wall Coat Hook Rack from Peter Pepper consists of 4 triple prong coat hooks on an anodized aluminum bar. Wall mounting is concealed. Dimensions: 22-3/8" W x 4"H x 3-3/4"D Weight: 4 Pounds Attachment: Concealed

The 2084-XL-AL Hat and Coat Hook Rack from Peter Pepper consists of 4 side-by-side double prong coat hooks on an anodized aluminum bar. If this is a bit larger than needed, have a look at the 2084-AL 3 hook version. Wall mounting is concealed...

The 2084-AL Coat Hook Rack from Peter Pepper consists of 3 side-by-side double prong coat hooks on an anodized aluminum bar. Not quite large enough? Take a look at the 2084-XL-AL 4 hook version. Mounting to wall is concealed. Dimensions: 16" W x 2"H...

Camden-Boone's 129-120 has twelve heavy duty coat hooks welded to a brushed steel rail, providing a heavy duty wall-mounted coat rack solution.No, this is not a pretty coat hook rail for public areas and boardrooms. That's not what it was designed for...

Camden-Boone's 129-600 has six heavy duty coat hooks welded to a brushed finish steel back panel to provide a wall-mounted coat rack for rough duty. This isn't a coat hook rail for customer areas. That's not what it was designed for. It's intended for...

The Camden-Boone 135-000 is an Unlimited coat hook rack which can be any length.  The minimum is 2 feet.  The maximum is whatever you want it to be. The options on this page are in foot increments for illustration, but if you need your...

The Magnuson Coat Hook Panel TH37M is a heavy duty magnetic panel with three dark grey plastic coat hooks. It has an overall weight capacity of 12 pounds. 3-3/4" H x 14-3/4" W x 2-3/16" D Capacity: 12 Pounds

The Magnuson TH40M is a heavy duty magnetic coat hook rack with four dark grey plastic coat hooks. It has an overall capacity of 12 pounds. 4-1/4" H x 15-3/4" W x 1-15/16" D Capacity: 12 Pounds

Using the K-41ST coat hooks, this stainless steel coat hook panel is available in three lengths: 2 Hooks - 12" Wide 3 Hooks - 18" Wide (As Pictured) 6 Hooks - 36" Wide All measure 4-1/4" deep, from back of panel to tip of hooks. Height of Panel:...

The 207-103 triple coat hook rack from Camden-Boone is a bit excessive. It was tested to 70 pounds per coat knob and never budged.  Your heaviest winter coat and a backpack full of hardware will not bother this coat rack. More than you need? ...

The 207-102 double coat knob rack from Camden-Boone was tested to 70 pounds per hook and never budged.  Your heaviest winter coat and backpack full of hardware will not bother this coat rack. If this is too small, you may prefer the triple knob...

Magnuson's Arnage PC-M is a steel wall-mounted coat rack with a hanger rod. It also includes 3 single-prong hooks on the back support frame. Arnage is available in White, Black, Silver, or Sand powder coated finishes. If you need freestanding coat...