Glaro 36 Inch Coat Rack 501-SA-36 - Wall Mount - Hanger Rod - Aluminum

The Glaro 501-36 is the 36” width of Glaro’s series of wall-mounted single-shelf coat racks with hanger rods. The SA series uses a Satin Aluminum finish.

Glaro coat racks are modular in standard sections of 24”, 30” and 36”. You have two end brackets at those three sizes. If you need larger sizes, depending on how wide you need your coat rack to be, you have middle brackets for support. For instance, a 60” wide rack would have two end brackets, one middle bracket, and two sections of shelf and rod tubes. 

All 501-SA coat racks are 13-1/2” front-to back. The wall brackets measure 7” high.  Online you can order 501SA coat racks all the way up to 8 feet wide. However, if you need sizes larger than 8 feet, just let us know how wide you want the overall rack to be and we’ll determine the least expensive way to make it using the three modules.

So, you like the 501SA but think it would be better if it had two shelves?  Have a look at the 502SA double-shelf coat racks.  Or maybe a single shelf is fine but you'd like to have a place to hang backpacks, bags, scarves and such.  If that's the case you may want to check out the 8000CSA coat racks.  They consist of a 501SA but with the addition of a coat hook strip running along the wall.  Of course, some folks just want it all.  For that group of people, Glaro makes the 8000BSA coat racks with two shelves and a coat hook strip running along the wall. 

We're out of combinations.  What more could Glaro do?  Well, there are those who don't care for coat hangers.  They prefer nothing but coat hooks and as many as possible.  Glaro aims to please everyone with the 9000CSA coat rack consisting of a shelf and nothing but three rows of coat hooks, no coat hanger rod at all.  When you get a 9000CSA, you get an astonishing 12 hooks per foot.

Please note the heavy duty coat hangers shown in the photos are not included, but may be purchased separately.  If you have heavy items to hang or you're tired of folks bending your hangers, you have found the solution.

• Width: 36”
• Height: 7-1/2"
• Front-to-Back: 13-1/2"
• Length: Modular in 24", 30", or 36" Sections - No Limit with Middle Brackets
• Hanger Rod: 1" Diameter
• Material: Aluminum
• Finish: Satin Aluminum
• Percentage of Recycled Raw Materials: 50% to 100%
• Percent that May be Post-Consumer Recycled: 100%
• Made in the USA